Then run the nozzle check again and repeat the head cleaning if necessary. If print quality has not improved after repeating this procedure about four times, turn the printer off and wait overnight. If the nozzle check page does not print satisfactorily, you may need to repeat the head cleaning and print the nozzle check pattern again. If any segment of the printed lines is missing, as shown below, this could mean a clogged ink nozzle or a misaligned print head. If there are no print quality problems, such as gaps or missing segments in the test lines, the print head is fine. When the On light stops flashing, load a few sheets of paper and click Print Nozzle Check Pattern in the Head Cleaning window to confirm that the print head is clean.īelow are two sample nozzle check patterns:Ĭompare the quality of the printed check page with the sample shown below. Never turn off the printer while the On light is flashing. The On light flashes while the printer performs the cleaning cycle. Make sure that A4 size paper is loaded in the sheet feeder.Ĭlick the Maintenance tab, then click the Head Cleaning button. Make sure the printer is turned on and the ink light is off. Using the Head Cleaning utility for Windowsįollow the steps below to clean the print head using the Head Cleaning utility.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |